RF remote and controller for single color puck lights
PLEASE NOTE:
THE PARING SHOULD BE DONE WITH IN 5 SECONDS AS SOON AS YOU PLUG IN THE ADAPTER.
PLEASE NOTE:
THE PARING SHOULD BE DONE WITH IN 5 SECONDS AS SOON AS YOU PLUG IN THE ADAPTER.
1 TO 1 PAIR: If you have bought more than one set, and need one controller respond to one remote only? Please do as follows:
-
Only turn on one set of puck lights and make sure other sets are plug off. (take off the rest plugs to ensure there is no electricity going through other controllers)
-
Hold on to press “speed+”and “speed-”buttons on the remote at the same time until lights are flash..
Then the first remote will pair the first puck lights only.
-
Plug off the first set of puck lights that have already been set. Then turn on the second set.
-
Press “speed+”and “speed-” buttons on the second remote in the same way as the first set.(paring should be done as soon as you plug in the adapter with in 5 seconds)
Then the second remote will control the second set of puck lights only.
1 TO MULTIPLE PAIR: Need two controllers respond the same to 1 remote? Please do as follows:
First, turn on all the puck lights.
Second, hold on to press the green “LIGHT”button until all the lights flash.
Then the remote will be able to control all the two sets.
The rf remote if for used aiboo 12V single color puck lights,
Need more remote and controller, please click here:
Need more splitter for the controller, please click here
Following is other type of RF Remote and controller.
RGB RF remote and controller
click here if you need more rgb remote and controller
click here for the rgb splitter wires. click here for the rgb splitter box if you need more splitter for the rgb controller
CCT RF remote and controller
RGBW RF Remote control
Hold on press the red and blue button(the third row) until the lights flicker, the controller will be paired with the only remote.
