Remote Manual for Aiboo Lights
Remote Manual for Aiboo Lights
1、RF remote control pairing guides
2、IR remote guide
3、Connecting the remote control with Bluetooth
4、Connecting the remote control with WIFI
With our RF remote control, you can pair different light sets in a 1-to-1 or 1-to-many configuration.
1-to-1 Pairing
Definition: More than one set and need one controller to respond to one remote only.
1-to-Many Pairing
Definition: Many controllers respond the same to one remote.
Important Note:
The controller may be interrupted by other devices operating on the same frequency (433Hz).
The RF remote control has a range of up to 25 meters(80 feet).
1、RF remote control pairing guides
1、RF Remote for Single Color（12keys）
1-to-1 Pairing:
1.Turn on only one set of puck lights and ensure that other sets are unplugged (remove the plugs to ensure no electricity is flowing to other controllers).
2.Press and hold the “Speed +” and "Speed -" buttons on the remote simultaneously until the lights flash.
3.The first remote will pair with the first set of puck lights only.
4.Unplug the first set of puck lights that have been paired, then turn on the second set.
5.Repeat the process by pressing and holding the “Speed +” and "Speed -" buttons on the second remote.
6.The second remote will control the second set of puck lights only.
1-to-Many Pairing:
1.Turn on all the puck lights.
2.Press and hold the green "LIGHT" button until all the lights flash.
3.The remote will now control all the sets.
Note: Pairing of this remote must be completed within 5 seconds after plugging in the adapter.
2、RF Remote for Single Color (14 Keys)
1-to-1 Pairing:
1.Turn on only one set of puck lights and ensure that other sets are unplugged.
2.Press and hold the "Pair" button on the remote until the lights flash.
3.The first remote will pair with the first set of puck lights only.
4.Unplug the first set of puck lights that have been paired, then turn on the second set.
5.Repeat the process by pressing and holding the "Pair" button on the second remote.
6.The second remote will control the second set of puck lights only.
1-to-Many Pairing:
1.Turn on all the puck lights.
2.Press and hold the "Decode" button until all the lights flash.
3.The remote will now control all the sets.
Note: Pairing of this remote must be completed within 5 seconds after plugging in the adapter.
3、RF Remote for Single Color（16 keys） with timer function
1-to-1 Pairing:
1.Turn on only one set of puck lights and ensure that other sets are unplugged.
2.Press and hold the “120min” and “60min” buttons on the remote until the lights flash.
3.The first remote will pair with the first set of puck lights only.
4.Unplug the first set of puck lights that have been paired, then turn on the second set.
5.Repeat the process by pressing and holding the “120min” and “60min” buttons on the second remote.
6.The second remote will control the second set of puck lights only.
1-to-Many Pairing:
1.Turn on all the puck lights.
2.Press and hold the "LIGHT" button until all the lights flash.
3.The remote will now control all the sets.
Note: Pairing of this remote must be completed within 5 seconds after plugging in the adapter.
4、RF Remote for RGB Color (18 Keys)
1-to-1 Pairing:
1.Turn on only one set of puck lights and ensure that other sets are unplugged.
2.Press and hold the "Color -" and "Bright -" buttons on the remote until the lights flash.
3.The first remote will pair with the first set of puck lights only.
4.Unplug the first set of puck lights that have been paired, then turn on the second set.
5.Repeat the process by pressing and holding the "Color -" and "Bright -" buttons on the second remote.
6.The second remote will control the second set of puck lights only.
1-to-Many Pairing:
1.Turn on all the puck lights.
2.Press and hold the white color button until all the lights flash.
3.The remote will now control all the sets.
5、RF CCT Remote (16 Keys)
1-to-1 Pairing:
1.Turn on only one set of puck lights and ensure that other sets are unplugged.
2.Press and hold the “120min” and “60min” buttons on the remote until the lights flash.
3.The first remote will pair with the first set of puck lights only.
4.Unplug the first set of puck lights that have been paired, then turn on the second set.
5.Repeat the process by pressing and holding the “120min” and “60min” buttons on the second remote.
6.The second remote will control the second set of puck lights only.
1-to-Many Pairing:
1.Turn on all the puck lights.
2.Press and hold the "LIGHT" button until all the lights flash.
3.The remote will now control all the sets.Long press "on" button to delete the timer function.
Long press the "ON" button to delete the timer function.
6、RF Remote for RGBW (40 Keys)
ONLY 1-to-1 Pairing:
Press and hold the red and blue buttons (third row) until the lights flicker. The controller will pair with the remote.
2、IR remote guide
The IR remote does not require pairing, but please use it within a range of 5 meters (16.4 feet) and point it directly at the controller.
3、Connecting the remote control with Bluetooth
ATTENTION:A cell phone can connect to multiple Bluetooth-controlled lights simultaneously. However, if two or more cell phones are present, they cannot connect to the same Bluetooth-controlled light at the same time. To allow another device to connect, the currently connected cell phone must either be disconnected or moved at least 30 meters away from the light.
Downloading the App:
Scan the QR code to download the LotusLantern app on your Apple or Android device.
App Operation:
Open the LotusLantern app after installation.
Enable Bluetooth if prompted.
Navigate through the app interface to control color and brightness settings.
Make sure your lights are connecting to the power supply.
- Click on the LotusLantern APP icon, enter the APP page:
- After entering the APP interface, if Bluetooth is not enabled, “an application wants to enable the Bluetooth function of this device.” Click [Allow].
- switch to color and brightness interface:
- click to show the lamp list, view lamp list:
4、Connecting the remote control with WIFI
APP(TuyaSmart) Connection instructions and download QR code：
Step 1: Enter the Distribution Network State
There are two ways to enter the distribution network state:
- Long press the MODE+ button to enter the distribution network model.
- Long press the "ON" button on the remote control for about 5 seconds.
Step 2:Open the app
Step 3: Enter the WiFi password
Note: The router must be 2.4GHz WiFi
Click finish to enter the operation panel after the network configuration is successful.
