Mini Remote Controller for Single Color LED Strip Lights, RF Dimmer fo

This is a 11 keys mini RF LED controller + Remote dimmer switch set, DC 5-24V 12A for single color 3528 5050 LED strip lights, LED under cabinet puck lights lighting bars ect.

WORKING MODES:
1). 1 TO 1 MATCHED: 1 remote controls only 1 receiver at the same time.
2). 1 TO MANY MATCHED: 1 remote controls many receivers.

HOW TO SWITCH BETWEEN THE 2 MODES
1). The default mode is 1 to many, 1 remote can control many receivers. To switch to 1 to 1 control mode, leave the only one LED controller (receiver) powered on, also ensure there are not any electricity go through the controller of the other set.press the buttons 'SPEED +' and ‘SPEED -’ at the same time, until you see the lights flashing. Then this remote has been matched with the very receiver exclusively.
2). To switch to 1 to many control mode, have all the LED controller (receiver) powered on, press the green button with 'LIGHT' on it, until you see the lights flashing. Then this remote has been matched with all the receivers connected.
3). 1) and 2) can be reversed repeatedly according to your needs.

PLEASE NOTE:

THE PARING SHOULD BE DONE WITH IN 5 SECONDS AS SOON AS YOU PLUG IN THE ADAPTER. 

SPECIFICATION

Dynamic mode: 8 modes
Dynamic speed level: 10 levels
Lighting brightness level: 10 levels
PWM grade: 256 grades
Smooth dimmer effect: Yes
Working voltage: DC12-24V
Output current: Peak 5A
Remote frequency: 433.92MHz
Remote distance: >10m in open area
Battery: 3V CR2025 battery

Q&A:

1:What is the maxmium power of the lights can link to the controller:

The maxmium power is about 30W that link to the controller, and voltage between 12v-24vdc.