Controller

We found 6 products available for you
Filters
Regular price
$9.03
Sale price
$9.03
  • Wireless RF LED controller + remote for single color LED strips, under cabinet lights, cupboard lights,stripsetc.
  • 12-24V DC input, using cell button battery, safe for operation.
  • 11 keys, RF mini controller, dimmable function.
  • ONE TO ONE PAIRED:1 remote respond to one controller only,not be interrupted by other sets
  • Package: LED controller + remote control

Product Description

Pattern Name:1 to 1 control

Specification
Control type: 1 remote controller to match only 1 LED controller
Dynamic mode: 8 modes
Dynamic speed level: 10 levels
Lighting brightness level: 10 levels
PWM grade: 256 grades
Smooth dimmer effect: Yes
Working voltage: DC12-24V
Output current: Peak 6A
Remote control mode: RF Wireless
Remote frequency: 433.92MHz
Remote distance: 10m in open area
Battery: 3V CR2025 battery

How to pair the controller with remote? (Only 1 to 1 pair)
As soon as you plug in and turn on the lights within 2 seconds, press the green button “LIGHT” until the lights flicker.
Then The controller will respond to the remote only, the controller will not be interrupted by other remote.
Note: The controller is 1 to 1 paired with the remote, which means the remote can only control one controller at a time.

Regular price
$9.50
Sale price
$9.50

  • 8 dynamic effects,10-level dimmer,256-grade PWM
  • Remote distance: 15M at open area, the controller can be hidden, and you do not need to point at the controller.
  • 1-100% Dimmable with the smart remote
  • 1 to 1 remote paired, 1 to many remotes paired switchable.
  • Auto save function:the controller will remember your last setting of light mode when you switch on the lights again.

Product Description

Pattern Name:1 to multiple control

This is a 11 keys mini RF LED controller + Remote dimmer switch set, DC 5-24V 12A for single color 3528 5050 LED strip lights, LED under cabinet puck lights lighting bars ect.

WORKING MODES:
1). 1 TO 1 MATCHED: 1 remote controls only 1 receiver at the same time.
2). 1 TO MANY MATCHED: 1 remote controls many receivers.

HOW TO SWITCH BETWEEN THE 2 MODES
1). The default mode is 1 to many, 1 remote can control many receivers. To switch to 1 to 1 control mode, leave the only one LED controller (receiver) powered on, also ensure there are not any electricity go through the controller of the other set.press the buttons 'SPEED +' and ‘SPEED -’ at the same time, until you see the lights flashing. Then this remote has been matched with the very receiver exclusively.
2). To switch to 1 to many control mode, have all the LED controller (receiver) powered on, press the green button with 'LIGHT' on it, until you see the lights flashing. Then this remote has been matched with all the receivers connected.
3). 1) and 2) can be reversed repeatedly according to your needs.

SPECIFICATION

Dynamic mode: 8 modes
Dynamic speed level: 10 levels
Lighting brightness level: 10 levels
PWM grade: 256 grades
Smooth dimmer effect: Yes
Working voltage: DC12-24V
Output current: Peak 6A
Remote frequency: 433.92MHz
Remote distance: >10m in open area
Battery: 3V CR2025 battery

NOTE:

The remote will be able to pair with both controllers, but they may not react to the remote simultaneously because two controllers would be easily interrupted by each other.

Regular price
$8.10
Sale price
$8.10
  • UPDATED RGB CONTROLLER: Wireless RF LED controller + remote for RGB color changing LED strips, under cabinet lights, ceiling downlights etc.
  • STICK ON ANYWHERE: The remote could be stick to anywhere with the updated magetic and iron plate system,In this case, you will never worry about finding the remote !
  • PREMIUM QUALITY : With protective case,controller will be more reliable. 17 keys, mini controller, 19 dynamic modes, 20 static colors, 5 brightness grades and 10 speed grades.
  • CONVINENT: Good range without having to aim at it, control distance is 15M at open area, the controller can be hidden, and you do not need to point at the controller.
  • AUTO SAVE FUNCTION: the controller will keep the last time memory if you switch on the cabinet lights again.

Product Description

Pattern Name:RGB, 1 to 1 control

SPEC.
Control type: 1 remote controller to match only 1 RGB controller
Dynamic mode: 19 modes
Speed level: 10 levels
Static color: 20 colors
Lighting brightness level: 5 levels
PWM grade: 256 levels
Smooth dimmer effect: Yes
Voltage: DC12-24V
Output current: 3-way, peak 4A per channel
Remote control mode: RF Wireless
Remote frequency: 433.92MHz
Remote distance: 15m in open area
Battery: 3V CR2025 battery


If you have bought more than one set,need one controller respond to one remote only? 
please do as follows: 

First, only turn on one set of puck lights and make sure other sets are plug off. (take off the plug,ensure there are not electricity go through the controller of the other set)

Second, press the color- and bright- buttons on remote at the same time. Until it flicker.

Then the remote will pair with the puck lights only.

Third, plug off the first set of puck lights that have already been set. Then Turn on the second set.

Fourth, also press the color- and bright- buttons on the second remote at the same time. Until it flash.

Then the second remote will control the second set of puck lights only.


Switch to 1 to many control mode 

have all the LED controller (receiver) powered on, press the white button about two seconds until you see the lights flicker.then the remote control will restore to the initial set up for normal use.

Note:
When connecting the lights, make sure the arrow symbol on the joint of controller point to the one on the end of the distributor or strips.

The remote will be able to pair with both controllers, but they may not react to the remote simultaneously because two controllers would be easily interrupted by each other.

 

Regular price
$14.99
Sale price
$14.99
Regular price
$14.99
Sale price
$14.99
  • High-performance RGBW led touch remote controller, adopting the most advanced PMW control technology, controlling all RGBW led products with four lines and three circuits(common anode), owning 640 thousand colors and 20 automatical changing modes to choose.
  • The momory function(that is to say, the previous settings will be resumed when power on again). It is widely used in led RGBW led module.
  • With the technology of the 2.4G high frequency wireless remote control, it has the characteristics of low power consumption, long distance transmission, and strong anti-interference ability, high speed telecommunication, etc.
  • The remote looks fashionable and elegant, with simple and practical functions of color changing and brightness dimming

 

 

Product Description

Item: 2.4G Touch screen LED RGBW controller

The remote was design for AIBOO Cabinet lights and strips specially, for other lights application, may cause color inconsistance

Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and check the connection of both the cathode and anode, otherwise the controller will be broken.

Please don’t connect wires with power on.Switch on again only when it is in right connection and no short circuit.

Keep your finger off the touch ring when installing the batteries, to improve its sensitivity, and use the remote (3 seconds later) after the batteries are installed. Please re-install the batteries, if the touch ring is found low-sensitivity.

Do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

The input voltage of this controller should be follow the specifications, other high voltage would most probably destroy it

Don’t peel off the label on the controller in case any indication information will be missed.

Features
640000 Colors at your fingertips
50000Hours long life spain
Wireless and smooth touch remote control
Effective receiving distance about 30 meters
Easy use,plug and play

Package:
1pcs x LED RGBW Controller
1pcs x Touch LED remote (Battery is not included because of the security reason and custom problem during transport)​

2pcs X 2in1 5pin distributor

Regular price
$9.99
Sale price
$9.99
Regular price
$9.99
Sale price
$9.99

Hand wave sensor for AIBOO Black cord single color cabinet lights

Input cords: 150cm / 60 inch

Output cords: 15cm / 6 inch

Regular price
$12.99
Sale price
$12.99

Click here to download: RGBWW LED Dimmer APK

download and install the APK to your Android devices.


Introduction

H801WiFi communicates with Android mobile phones through WiFi to achieve dimming function. The router can be set as an access point, you can connect your phone and H801WiFi to the same router. Once the phone and H801WiFi are connected to the same router, you can also set H801WiFi as a wireless access point so that another H801WiFi can connect to it, by this way, multiple H801WiFi can be connected wirelessly to prolong control distance and increase the number of controllers.


Performance

Connect and control RGB lamps easily by ‘LED Dimmer’.
Output RGBWW, 5 routes PWM data.
Refresh frequency is 500HZ.
Support 802.11 b/g/n.
Fast transmission, response sensitive.
H801WiFi can be controlled separately.
H801WiFi can be contolled by multi phones simultaneously.
Built-in dozens of lighting effects.


Operation Instruction

Connect the phone to H801WiFi

1

Step 1 : Power on H801WiFi, install ‘LED Dimmer’ and create shortcut

Duplicate LEDDimmer.apk to phone and click to install, long press the icon and drag it to home screen.

2

Step 2 : Turn on WiFi

Power on H801WiFi, click phone pull-down menu, click settings, turn on WLAN, then choose and click ‘HCX_******’, password is ‘88888888’, enter password and click connect.

3

4

The pop-up icon indicates WiFi is connected.

5

Step 3: Run LED Dimmer

Click LED Dimmer, pops up the following operation interface,slide on color wheel, the light be changed with the color accordingly. Click the button in the middle, the lights will be off.

6

Click the effect selection dialog, there are many effects for choosing.

7

Click menu-Color Rod to set the brightness of each color and playing speed.

8

Step4 : Connect to the router

9


If you require your phone to control the lights and surf the internet at the same time, you must connect H801WIFI to the router. Please follow the procedures:

  1. Install LEDDimmer.apk, and turn on WIFI.
  2. Click on menu– ‘Router’, click ‘WLAN AP’, choose the right router, and enter password, then click ‘link’. All H801WIFI that can communicate with the phone has been connected to the outer. Connect your phone to router too, after connection, your phone can both surf the internet and control H801WIFI.

10


Product Display

11

12

13


Connection Diagram

14


Specifications

Input Voltage : DC5V–24V
Power Consumption
 : 0.5W
Dimension : 93mm x 46mm x 20mm
Output : 5 routes PWM, each route 4A

Wishlist Products

You have no items in wishlist.